Catalog
Showing 1–50 of 82 results
-
10T PAN JACK HYDRAULIC LIFTER
700,00 zł10T PAN JACK HYDRAULIC LIFTER
PAN type hydraulic railway jack with a lifting capacity of 10 tons.
Round, stable base, thanks to which the lift does not sink into the crushed stone. A lift designed to carry loads.
You can also order on:
700,00 zł 
Adjustable engine housing for the Bernard Moteurs TYPE B17 4056
300,00 złAdjustable engine housing for the Bernard Moteurs TYPE B17 4056
Adjustable engine housing for the Bernard Moteurs TYPE B17 4056.
Condition: used
300,00 zł-
AIRTEC MASTER 35, PETROL IMPACT WRENCH
6 900,00 złAIRTEC MASTER 35, PETROL IMPACT WRENCH
The Master 35 petrol impact wrench is ideal for works related to the assembly and demolition of the track wherever speed and mobility are of the essence. It is used for the replacement of single sleepers, repairs of crossings and railway turnouts.
TECHNICAL PARAMETRES:
- Engine type – 56.5 c.c. two-stroke, petrol
- Torque – 500 – 1400 Nm
- Power – 4 HP
- Standard 1” pin square
BENEFITS:
- low weight – only 18.2 kg
- low fuel consumption (fuel tank – 0.7 L – about 1 hour of work)
- low exposure to vibrations
- low exhaust emissions
- low maintenance costs
SET CONTAINS:
- Airtec Master 35 petrol impact wrench.
You can order also on:
6 900,00 zł -
ATLAS COPCO COBRA TT PETROL BREAKER
5 500,00 złATLAS COPCO COBRA TT PETROL BREAKER
The Cobra ™ TT hammer has been optimized for railway applications, in
particular for railroad tamping. Adjustment of the height / tilt of the
surface is carried out using jacks and then the sleepers in the rail section
are tamped with Cobra TT hammers. It is best to work in a team of two or
four hammers. It works with a relatively high frequency of 1620 beats /
min. The impact energy is high enough to pull the ballast back under the
sleepers and low enough to avoid fragmentation of the ballast.TECHNICAL PARAMETERS:
Engine type – two-stroke, single cylinder, 90cc
Engine power – 2HP
Gasoline-oil mixture 2%
Vibration level – 3.80 m / s2
Impact force – 40 J
Number of strokes – 720-1620 1 / minBENEFITS:
TT hammers have decompression valves and electric ignition. This makes it easier to start them in all weather conditions.
Weighing just 24 kg, the Cobra ™ is easy to carry.The HAPS (Hand Arm Protection System) keeps the Cobra ™ deviceon
A unique solution. It allows you to do heavy-duty work twice as long as other petrol-powered hammer models.SET CONTAINS:
Atlas Copco Cobra TT petrol breakerYou can also buy on:
5 500,00 zł -
Attachments for Atlas Copco Cobra TT
450,00 złAttachments for Atlas Copco Cobra TT
Attachments for Atlas Copco Cobra TT:
- tamping attachment
- breaking attachment
450,00 zł -
Axle for Geismar TPAS200
200,00 zł -
Bernard Moteur silencer housing TYPE B17
120,00 złBernard Moteur silencer housing TYPE B17
Bernard Moteur silencer housing TYPE B17.
Condition: used
120,00 zł -
Bernard Moteur TYPE B17 engine housing.
400,00 złBernard Moteur TYPE B17 engine housing.
Bernard Moteur TYPE B17 engine housing.
Condition: used
400,00 zł -
Bernard Moteurs Type B17 4056 engine
1 200,00 złBernard Moteurs Type B17 4056 engine
Bernard Moteurs Type B17 4056 engine
Condition: Used, engine overhauled, fully functional.
1 200,00 zł -
Bernard Moteurs TYPE B17 engine carburetor.
230,00 złBernard Moteurs TYPE B17 engine carburetor.
Bernard Moteurs TYPE B17 engine carburetor.
Condition: used230,00 zł -
Broach cutter MA2L Rail SRCV320
200,00 zł -
Broach cutter SCRV320
147,00 zł -
Broach cutter SCRWC30mm
147,00 zł -
Broach cutter SCRWC32mm
147,00 zł -
Broach cutter TCT Rail SCRWC30mm
147,00 zł -
Broach cutter TCT Rail SCRWC32mm
147,00 zł -
Broach cutter TCTR32
147,00 zł -
BUCKLE WITH RATCHET 1.25T
350,00 zł -
Camshaft for the Bernard Moteur TYPE B17 engine.
170,00 złCamshaft for the Bernard Moteur TYPE B17 engine.
Camshaft for the Bernard Moteur TYPE B17 engine.
Condition: used
170,00 zł -
CEMBRE LD1P PETROL RAIL DRILL
5 000,00 złCEMBRE LD1P PETROL RAIL DRILL
The Cembre rail drill is designed for drilling holes for splint joints as well as railings and railway sensors. Thanks to interchangeable templates, it is suitable for drilling in both 60E1 and S49 rails. It has a drill cooling system, thanks to which more holes can be made with one drill. The used trepan drill allows for faster drilling of the hole using a smaller machine with less weight. Cembre drilling machines are specially designed for the rail sector. The main idea of the project was to optimize the drilling process in various conditions.
TECHNICAL PARAMETERS:
- Engine type – 4 stroke
- Displacement – 35.8 cm3
- Manual starting
- Maximum drilling depth – 50 mm
- Drilling range – 7÷40 mm
- Drilling range for milling – 13-40 mm
- Maximum depth for milling – 50 mm
- Drilling range for twist drills – 7-27,5 mm
- Maximum depth for twist drills – 42 mm
SET CONTAINS:
- Cembre LD-P1 rail drill in box *
- Cooling unit with hand pump and maximum pressure valve.
- Cembre LD-1P rail or tram drill holder.
You can order also on:
5 000,00 zł -
CEMBRE SD9-P RAILWAY SLEEPER DRIL
5 300,00 złCEMBRE SD9-P RAILWAY SLEEPER DRIL
Cembre drills are designed for drilling in wooden railway sleepers. They have been specially designed with the rail sector in mind. It ensures high precision and speed of making holes.
TECHNICAL PARAMETERS:
- Engine type – two-stroke, Kawasaki engine
- Displacement – 45.4 cm3
- Starting – manual
- Engine power – 1.4 kW
- Maximum drilling depth – 200 mm
- Drilling range – 20 mm *
SET CONTAINS:
- Cembre SD-P9 sleeper drill
- Transport box
You can also order on:
5 300,00 zł -
Centrifugal regulator for the Bernard Moteur TYPE B17 engine.
90,00 złCentrifugal regulator for the Bernard Moteur TYPE B17 engine.
Centrifugal regulator for the Bernard Moteur TYPE B17 engine.
condition: used
90,00 zł -
Crankshaft for the Bernard Moteur TYPE B17 engine.
200,00 złCrankshaft for the Bernard Moteur TYPE B17 engine.
Crankshaft for the Bernard Moteur TYPE B17 engine.
Condition: used
200,00 zł -
DOUBLE DECK TROLLEY
6 700,00 złDOUBLE DECK TROLLEY
It is used for all railway works. When used for transporting tools and materials, it increases the efficiency of each job. High load capacity of 2000 kg. Equipped with an automatic brake and LED warning light.
The trolleys are renovated (sandblasted and painted) and have new aluminum tops.
TECHNICAL PARAMETERS:
- Width – 169 cm
- Length – 183 cm
- Height – 34 cm
- Lifting capacity – 2000 kg
- Weight – 138 kg
You can order also on:
6 700,00 zł -
Filter housing for the Bernard Moteurs TYPE B17 engine.
80,00 złFilter housing for the Bernard Moteurs TYPE B17 engine.
Filter housing for the Bernard Moteurs TYPE B17 engine.
Condition: used
80,00 zł -
Flywheel with coil for lighting for Bernard Moteurs TYPE B17 engine
250,00 złFlywheel with coil for lighting for Bernard Moteurs TYPE B17 engine
Flywheel with coil for lighting for Bernard Moteurs TYPE B17 engine
Condition: used
250,00 zł -
GEISMAR COACHSCREWING SOCKET
370,00 złGEISMAR COACHSCREWING SOCKET
Geismar coachscrewing socket:
- fastening nut socket 39mm
- coach screw socket 28x21mm
370,00 zł -
Geismar PHG.2 Handheld Grinder
4 500,00 złGeismar PHG.2 Handheld Grinder
Geismar PHG.2 Handheld Grinder
Lightweight, portable multi-purpose grinder Geismar PHG.2 Disc: 230 mm Honda GX35 engine, 4-stroke, overhead valve OHC – 6600 rpm – power 1.3 HP – can be used in any position.
4 500,00 zł -
Geismar PRUL Rail drilling machine
3 000,00 złGeismar PRUL Rail drilling machine
The PRUL light rail drill is designed for drilling in all types of rails, even in high-alloy rails, using drills with replaceable carbide tips.
Its outstanding performance, strength and lightness make the machine extremely comfortable to use.
3 000,00 zł -
GEISMAR TC COACH SCREWING MACHINE
14 300,00 złGEISMAR TC COACH SCREWING MACHINE
The TC screwdriver is the ideal machine for intensive work. The high torque allows easy unscrewing and screwing. The two-speed gearbox ensures efficient operation. The robust construction and low maintenance requirements make the TC screwdriver an exceptional machine. The TC screwdriver is equipped with a roller arm to keep the machine stable on the track.
TECHNICAL PARAMETERS:
- Engine – Honda GX200 or GX160
- Minimum speed 105
- Maximum speed 200
- Slow tightening torque 200 – 600 N
- Fast tightening torques 150 – 400 N
- Number of tightening speeds: 2
- Weight: 91 kg (machine only)
SET CONTAINS:
- TC Geismar coach screwing machine
- Roller for TC Geismar
You can also buy on:
14 300,00 zł -
Geismar TPAS200 Angle Gear Housing
800,00 zł -
Geismar TPAS200 clutch hub
250,00 zł -
Geismar TPAS200 Conical Wheel Set
850,00 zł -
Geismar TPAS200 Cover with oil pipe outlet
100,00 złGeismar TPAS200 Cover with oil pipe outlet
Geismar TPAS200 Cover with oil pipe outlet
condition: used
100,00 zł -
Geismar TPAS200 Guide Axle
150,00 zł -
Geismar TPAS200 Housing element
250,00 zł -
Geismar TPAS200 housing with speedometer
800,00 złGeismar TPAS200 housing with speedometer
Geismar TPAS200 housing with speedometer
condition: used
800,00 zł -
Geismar TPAS200 hydraulic distributor
550,00 złGeismar TPAS200 hydraulic distributor
Geismar TPAS200 hydraulic distributor.
Condition: used
550,00 zł -
Geismar TPAS200 main gear housing
350,00 zł -
Geismar TPAS200 oil pump
350,00 zł -
Geismar TPAS200 Pump Drive Pulley
200,00 zł -
Geismar TPAS200 pump gear housing
150,00 zł -
Geismar TPAS200 spindle
600,00 zł -
Geismar TPAS200 Worm with a pair of gears
800,00 złGeismar TPAS200 Worm with a pair of gears
Geismar TPAS200 Worm with a pair of gears.
Condition: used
800,00 zł -
HAND KEYS FOR RAILWAY SCREWS
250,00 złHAND KEYS FOR RAILWAY SCREWS
Hand keys for railway screws. Manyfactures by our company:
- with fastening nut socket 39 mm
- with coach screw socket 28×21 mm
250,00 zł -
Head for the Bernard Moteur TYPE B17 engine
80,00 złHead for the Bernard Moteur TYPE B17 engine
Head for the Bernard Moteur TYPE B17 engine
Condition: used
80,00 zł -
Husqvarna K1250 rail saw
2 800,00 złHusqvarna K1250 rail saw
Husqvarna K 1250 Rail is one of the most efficient cutters on the market, adapted to railway, tram
and subway tracks. Cutting with the tool is quick and easy, the hook allows quick attachment to
the rail, and the double attachments allow cutting from any direction. Shield not included.TECHNICAL PARAMETERS:
Displacement – 119 cm3
Blade diameter (max.) – 350 mm
Cutting depth (max.) – 125 mm
Power – 5,8 kW
Rail holders RA 10 & RA 10 s
EasyStart decompression valveBENEFITS:
Magnesium Blade Guard – Contributes to a light weight which
results in an improved ratio of power to weight. The new, stepless
adjustment makes it easier to change the cutting position.
Less vibration on the cutter’s handle means more comfort and
longer working time.SET CONTAINS:
Husqvarna K1250 petrol rail saw with RA10 rail holder and transport boxYou can also buy on:
2 800,00 zł -
Husqvarna K1260 rail saw
4 600,00 złHusqvarna K1260 rail saw
Cutting railroad tracks requires a lot of power, precision, and speed. The K 1260 Rail model is one
of the most efficient cutters on the market, adapted to railway, tram, and metro tracks. Cutting
with the tool is quick and easy, the hook allows you to quickly attach it to the rail, and the double
attachments allow you to cut from any direction. Shield not included.TECHNICAL PARAMETERS:
Displacement – 119 cm3
Blade diameter (max.) – 350 mm
Cutting depth (max.) – 125 mm
Power – 5,8 kW
Rail holders RA 10 & RA 10 S
Replaceable adapter sleeve
Air-cooled two-stroke engine
EasyStart decompression valveBENEFITS:
Magnesium Blade Guard – Contributes to a light weight which results in an
improved ratio power to weight.
The new, stepless adjustment makes it easier to change the cutting position.
Active Air Filtration ™ – Our two-stage centrifugal air purification system and
single-paper filter increase product life and extend filter cleaning intervals.
Less vibration on the cutter’s handle means more comfort and longer
working time.SET CONTAINS:
Husqvarna K1260 petrol rail saw with RA10 rail holder and transport boxYou can also buy on:
4 600,00 zł -
Husqvarna K1270 rail saw
6 700,00 złHusqvarna K1270 rail saw
Cutting railroads requires power, precision, and speed. Husqvarna K 1270 Rail (formerly K 1260 Rail) is the
most powerful power cutter on the market, designed to work on railway, tram and metro tracks. Cuts
quickly and easily, the arm allows quick attachment to the rail, and double mounting sockets allow you
to cut from both sides of the rail. Everything is delivered in a transport box. The holding arms of the
Husqvarna RA10 and RA10 S for the K 1270 Rail cutter have extremely precise needle and ball bearings.
Easy to install on the rail, they provide a right angle cut in all planes. The foldable cutting position
indicator shows the exact cutting line. Weight 5.3 kg. The RA10 is designed for railway rails and the RA10 S
for tram rails. Shield not included.TECHNICAL PARAMETERS:
Air-cooled two-stroke engine
Capacity cylinder displacement: 119 cm3
Power: 5.8 kW
Power to weight ratio: 0.28 / 0.27
Weight without fuel and cutting device: 21.2 kg
Blade: 400 mm
Fixing hole: 25.4 mm
Max. Cutting depth: 145 mBENEFITS:
Active Air Filtration™
Vibration damping system
EasyStart
SmartCarb™SET CONTAINS:
Husqvarna K1270 petrol rail saw with RA10 rail holder and transport boxYou can also buy on:
6 700,00 zł -
Hydraulic weld trimmer – with knifes
6 500,00 złHydraulic weld trimmer – with knifes
Lightweight, hand-powered weld trimmer machine for cutting thermite welds.
Allows cutting with a force of up to 220 kN.
The maximum operating pressure of the machine is up to 320 bar. The total
weight of the unit is 80 kgYou can order also on:
6 500,00 zł
