Catalog
Showing 51–81 of 81 results
Ignition coil for Bernard Moteurs TYPE B17 engine
150,00 złIgnition coil for Bernard Moteurs TYPE B17 engine
Ignition coil for Bernard Moteurs TYPE B17 engine.
Condition: used
150,00 zł-
IRON MAN PERMAQUIP
6 800,00 złIRON MAN PERMAQUIP
A lightweight gate, the Permaquip Ironman is a proven track design that can be used singly or in sets to lift and transport long rails, sleepers or turnout parts from one location to another. Each IRONMAN gate is equipped with a crash-resistant braking system that operates on two wheels on one leg. The brake lever works on both sides. The Ironman requires manual drive along the track by at least two employees to ensure safe transport of the cargo being handled. The Ironman can also be used to transpose rails from one side of the track to the other.
6 800,00 zł -
MASTER 35 EXTENSION SOCKET
200,00 złMASTER 35 EXTENSION SOCKET
Steel extension socket for the Master 35 screwdriver. Fits alloy screw sockets, lugs, and screws. Ideal when there is a need to tighten a screw in a hard-to-reach place.
You can order also on:
200,00 zł -
MASTER 35 IMPACT SOCKETS
170,00 złMASTER 35 IMPACT SOCKETS
MASTER 35 impact sockets. Thick-walled, reinforced sockets for the Master 35 Cappers with increased durability. Square mount – 1 inch:
- fastening nut socket 39 mm
- soach screw socket 28×21 mm
- or fishplate nut socket 41 mm
Price per piece.
You can order also on:
170,00 zł -
Measuring cup for Bernard Moteur TYPE B17 engine
80,00 złMeasuring cup for Bernard Moteur TYPE B17 engine
Measuring cup for Bernard Moteur TYPE B17 engine.
Condition: used
80,00 zł -
MP12 GEISMAR RAIL GRINGING MACHINE
12 500,00 złMP12 GEISMAR RAIL GRINGING MACHINE
Provides excellent grinding of the side surface of the rail head. Guide rollers guarantee accurate sanding from horizontal to vertical position. The long roller base provides a very good reference point for sanding. The grinder can be locked at any angle using the extension arm. The four-stroke gasoline engine provides exceptional grinding performance. Rigid steel frame. Safe to use.
TECHNICAL PARAMETERS:
- 4 – stroke petrol engine
- Silencer with a protective grille
- Cool air supply
- Rotational speed of the grinder shaft – 3200 rpm
- Distance between supporting rollers – 1050 mm
You can also buy on:
12 500,00 zł -
Oil pan for the Bernard Moteur TYPE B17 engine
90,00 złOil pan for the Bernard Moteur TYPE B17 engine
Oil pan for the Bernard Moteur TYPE B17 engine
Condition: used
90,00 zł -
Piston with connecting rod for the Bernard Moteur TYPE B17 engine.
60,00 złPiston with connecting rod for the Bernard Moteur TYPE B17 engine.
Piston with connecting rod for the Bernard Moteur TYPE B17 engine.
Condition: used
60,00 zł -
Puller cup for the Bernard Moteurs TYPE B17 engine
60,00 złPuller cup for the Bernard Moteurs TYPE B17 engine
Puller cup for the Bernard Moteurs TYPE B17 engine. Condition: used60,00 zł -
RAIL LIFTING CAPACITY 1.5T
1 300,00 złRAIL LIFTING CAPACITY 1.5T
Useful for
– replacement of spacers
– leveling rails during welding or welding
– laying rail rollsLift capacity 1.5T.
You can also order on:
1 300,00 zł -
Rail measuring wheel
500,00 złRail measuring wheel
Measuring wheel for rails.
Lightweight design, foldable handle for easy transport.
Range 0.10 – 9999.9 meters.
500,00 zł -
Rail sterssing kit – double set
46 200,00 złRail sterssing kit – double set
The Rail Stressing Kit regulates the tension of rails. Double is designed for simultaneous
regulation on two rails, while single allows work on only one rail. It is equipped with a combustion
hydraulic pump, which eliminates manual pumping and reduces the time required to regulate
tension. The maximum pulling force is 78 tons.
PERMAQUIP RAIL STRESSING KITDouble set include:
1 x Honda engine pump,
2x long connectors,
2x short connectors,
2 x actuators,
1 x cables,
2 x rail grippersYou can order also on:
46 200,00 zł -
Rail stressing kit – single set
34 200,00 złRail stressing kit – single set
The Rail Stressing Kit regulates the tension of rails. Double is designed for simultaneous
regulation on two rails, while single allows work on only one rail. It is equipped with a combustion
hydraulic pump, which eliminates manual pumping and reduces the time required to regulate
tension. The maximum pulling force is 78 tons.
PERMAQUIP RAIL STRESSING KIT
SINGLE AND DUAL
1 x Honda engine pump,
2x long connectors,
2x short connectors,
2 x actuators,
1 x cables,
2 x rail grippersYou can order also on:
34 200,00 zł -
Rail tongs
150,00 zł -
RAILWAY JACK 10T OR 5T
400,00 złRAILWAY JACK 10T OR 5T
Railway hoist made of aluminum. Lightweight design easy to carry.
10 or 5 ton capacity available.
You can also order on:
400,00 zł -
ROBEL 30.82 RKS SCREWING MACHINE
15 500,00 złROBEL 30.82 RKS SCREWING MACHINE
Robel 30.82RKS For tightening and loosening nuts and sleeper, hook and fishplate bolts.
TECHNICAL PARAMETERS:
•Engine – 6,5 HP
•Power – 4,9 kW/ 3800 U/minBENEFITS:
Fast wrenching. Optimum result.
Intuitive setting of torque via potentiometer
No-maintenance electronic disc clutch
Selection between two gears depending on the stiffness of the screw
Quick-change chuck for fast change of sockets
High throughout due to high spindle speed
Perfectly illuminated working area
Conversion kit for new controls available for version 5 machinesSET CONTAINS:
Robel 30.82RKS coach screwing machine
Roller for Robel 30,82You can order also on:
15 500,00 zł -
ROBEL 30.82 SCREWING MACHINE
14 700,00 złROBEL 30.82 SCREWING MACHINE
Machine with high performance designed for work on long distances. Used for assembly / disassembly of the railway track with K-type fastenings, or other types where the attachment is mounted with a screw (e.g. Pandrol e-clip). The screwdriver is equipped with an arm with a roller, ensuring the stabilization of the machine on the track.
TECHNICAL PARAMETERS:
- Engine – 6,5 HP
- Power – 4,1 kW/ 3800 U/min
BENEFITS:
- High tightening torque can be set by means of a servo-hydraulic mechanism
- control by indication of the tightening torque – short-term increase of the tightening torque via the switch-off lever, without changing the hydraulic basic settings
- optimal center of gravity and low weight
- 2-speed gearbox for optimal performance
- key exchange holder
SET CONTAINS:
- Robel 30.82 coach screwing machine
- Roller for Robel 30,82
You can also buy on:
14 700,00 zł -
ROBEL 62.05 VERTICAL TAMPER
7 500,00 złROBEL 62.05 VERTICAL TAMPER
The new, light construction and reduced weight of the device reduce the fatigue of the crew. Vibrations transmitted to the operator’s hands and arms have also been reduced to a minimum thanks to the patented technology of double vibration damping. The device is ideal for obtaining long-term track geometry in less than 2 minutes / sleeper. Provides optimal track opening parameters. Correction of track geometry errors that lasts for a long time and ensures trouble-free operation.
You can order also on:
7 500,00 zł -
ROBEL 62.06 VERTICAL TAMPER
8 600,00 złROBEL 62.06 VERTICAL TAMPER
Light design and redued wight that reduce the feeling of crew fatigue.An ideal device for obtaining
long-lasting track geometry in less than 2 minutes per sleeper. Provides optimal track tamping
parameters. Correction of track geometry errors that persists for a long time and ensures trouble-free
operation. It has a replaceable tamping tool made of wear-resistant steel and a modern four-stroke
Dolmar engine.TECHNICAL PARAMETERS:
Engine type – two stroke
Engine model – Dolmar
Engine power – 1,42 kWBENEFITS:
Low weight, just 24.5 kg – makes work and transport easier and
more comfortable
Reduced hand-arm vibrations – allows you to work longer without
operator fatigue.SET CONTAINS:
•Robel 62.06 vertical tamperYou can also buy on:
8 600,00 zł -
ROBEL COACHSCREWING MACHINE IMPACT SOCKET
370,00 złROBEL COACHSCREWING MACHINE IMPACT SOCKET
Robel coachscrewning machine impact sockets:
- fastening nut socket 39mm
- coach screw socket 28x21mm
370,00 zł -
ROLLER FOR GEISMAR, ROBEL SCREWING MACHINE
200,00 zł -
Side support for the Bernard Moteurs TYPE B17 engine shaft
130,00 złSide support for the Bernard Moteurs TYPE B17 engine shaft
Side support for the Bernard Moteurs TYPE B17 engine shaft.
Condition: used
130,00 zł -
SINGLE DECK TROLLEY
3 700,00 złSINGLE DECK TROLLEY
SINGLE DECK TROLLEY
It is used for all railway works. When used for transporting tools and materials, it increases the efficiency of each job. High
load capacity of 1000 kg. Equipped with an automatic brake and LED warning
light. The trolleys are renovated (sandblasted and painted) and have new tops made of waterproof plywood.
TECHNICAL PARAMETERS
Width – 162 cm
Length – 75 cm
Height – 35 cm
Lifting capacity – 1000 kg
Weight – 57 kgYou can order also on:
3 700,00 zł -
TANAKA TED-262 PETROL DRILL
1 800,00 złTANAKA TED-262 PETROL DRILL
The petrol drilling machine is used in work wherever there is no access to a constant power source, e.g. electricity. It has a gear lever lock, which makes work comfortable and precise.
TECHNICAL PARAMETERS:
- Displacement – 26.0 cm3
- Power – 1.1 KM / 0.8 kW
- Rotational speed of the drill – 8000 rpm.
- Maximum Avg. Drills – 25.4 mm
- Weight – 3.9 kg
BENEFITS:
- The engine of the new PureFire technology is economical and environmentally friendly
- The S-start system ensures a collision-free, quick start
SET CONTAINS:
- Tanaka TED-262 petrol drill
You can also buy on:
1 800,00 zł -
Tarcza do cięcia szyn Tytolit 350 mm Rail- opakowanie 10 sztuk
200,00 złTarcza do cięcia szyn Tytolit 350 mm Rail- opakowanie 10 sztuk
Tarcze do cięcia szyn TYROLIT
350 mm Rail odpowiednie do pił do szyn.
Sprzedawane w opakowaniach po 10 sztuk.
41H A30S-BF RAIL 100
350 x 4,0 x 25,4 mm
14″ x 5/32″ x 1″
5.500/ min max; 100 m/s max
Oferta na tarcze w cenie 350 zł brutto dotyczy produktu z terminem ważności do końca października!
Możesz zamówić także na:
200,00 zł -
Templates for Rail drill Cembre
600,00 zł -
TONGS FOR CONCRETE SLEEPERS
200,00 zł -
TONGS FOR WOODEN SLEEPERS
200,00 zł -
TPAS GEISMAR COACH SCREWING MACHINE
14 300,00 złTPAS GEISMAR COACH SCREWING MACHINE
TPAS offers very accurate torque control thanks to hydraulic servo valves. The wrench is designed for all types of fastenings where the paw is fixed with bolts or screws. In particular, it is suitable for: unscrewing / tightening screws of spring clips in fastenings of SKL type or other similar structures; unscrewing / tightening all kinds of screws. Thanks to the 2-speed gearbox, the TPAS nut runner enables all replacement, maintenance and track construction work to be carried out, making it an all-rounder for infrastructure needs. A hydraulic torque-limiting mechanism that is easy to read under all conditions allows you to preselect the tightening torque to optimize your work efficiency.
TECHNICAL PARAMETERS:
- Engine – 6,5 HP
- Maximum loosening torque: 103 daNm
- Two tightening speeds
- Weight: 100 kg (machine only)
SET CONTAINS:
- TPAS Geismar coach screwing machine
- Roller for TPAS Geismar
You can also buy on:
14 300,00 zł -
TS2 GEISMAR COACH SCREWING MACHINE
6 300,00 złTS2 GEISMAR COACH SCREWING MACHINE
The TS2 screwing machine is ideal for intensive operations requiring high performance. Easy loosening is possible thanks to the high torque. When tightening the two-speed gearbox, which allows you to achieve optimal performance. Due to the robust structure and low maintenance requirements, the screwdriver is very economical, which saves money throughout the life of the machine. The TS2 screwing machine is equipped with an arm with a roller, ensuring the stabilization of the machine on the track.
TECHNICAL PARAMETERS:
- Engine 6,5 HP
- Maximum unscrewing torque: 103 daNm
- Two tightening speeds
- Weight: 120 kg (machine only)
SET CONTAINS:
- TPAS Geismar coach screwing machine
- Roller for TS2 Geismar
You can also buy on:
6 300,00 zł -
TYROLIT GRILDING STONE
400,00 złTYROLIT GRILDING STONE
Fit for Geismar MP12gringing machine but also for other rail grinders. Fixing with 6 x M8 screws. High parameters up to 5090 revolutions per minute!
Stone dimensions: 150x72x80 mm.
400,00 zł
